top of page
FITTINGS
Click on subheading to find our available options
See our extensive range of tank fittings and accessories below
Fittings: Products
Fittings: Products
Fittings: Files
Fittings: Files
Fittings: Files
Fittings: Files
Fittings: Files
Fittings: Files
Fittings: Files
Fittings: Files
MANWAYS
Access hatches fitted to the cover of the tank, available either with a hinged lid or fully removable.
450mm x 450mm Fixed
600mm x 600mm Fixed
450mm x 450mm Hinged & Hasped
600mm x 600mm Hinged & Hasped
450mm x 450mm Low Profile
600mm x 600mm Low Profile
Fittings: Products
LOW LEVEL EMERGENCY ACCESS HATCH
600mm x 600mm
Fittings: Products
VENTS
110MM MUSHROOM VENT
For tanks with larger capacity. With stainless steel mesh and PVC fixing plate.
SCREENED VENT
MPDE white tank breather vent with stainless steel mesh and BSP threaded neck
Fittings: Products
RAISED FLOAT VALVE HOUSINGS
750mm x 400mm x 200mm
790mm x 610mm x 320mm
900mm x 800mm x 500mm
1830mm x 600mm x 500mm
Fittings: Products
RAISED FLOAT VALVE HOUSINGS
with Type AB Air Gap
750mm x 400mm x 200mm
790mm x 610mm x 320mm
900mm x 800mm x 500mm
1830mm x 600mm x 500mm
Fittings: Products
SCREENED OVERFLOWS
These are required on all warning and overflow connections to potable water tanks.
​
Bellmouth overflows are also available and are upward facing fitting with an enlarged mouth fitted internally in a water tank. Used on warning and overflow connections to maximise the water storage volume in a tank. The bellmouth overflow increases the spill over length to at least double that available with an upturned pipe.
Overflow 1
Available in ¾", 1", 1¼", 1½" and 2" sizes.
Overflow 2
Available in 2½", 3", 4" and 6" sizes
Fittings: Products
TYPE C CONNECTIONS
Hole cut for mechanical fixing of connections from ½" to 3".
Fittings: Products
THREADED SOCKETS
Factory fitted outlet connections.
PVC SPIGOT C/W THREADED SOCKET
Available in ½", ¾", 1", 1¼, 1½" and 2" sizes.
Fittings: Products
PVC TANK CONNECTORS
Supplied loose for customers to fit.
Available in ½" to 4" sizes.
Fittings: Products
PN16 CONNECTIONS
Factory fitted outlet connections.
Available in 2", 2½", 3", 4", 5", 6" and 8" sizes.
Fittings: Products
ESSEX CONNECTORS
Supply only BSP connectors.
Available in ½", ¾", 1", 1¼", 1½" and 2" sizes.
2¼" available for immersion provision.
Fittings: Products
BMS PROVISION / FOAM CUT OUT
To enable customers to drill and fit sensors, connections etc.
Standard 6" diameter although other sizes are available.
Fittings: Products
GRP LADDERS
GRP ladders are manufactured to provide a safe and lightweight means of vertical access combining corrosion resistance, long life, and low maintenance. It is recommended that all tanks over 2m high have both internal and external ladders fitted.
Suitable for both external and internal use.
Safety cages available on request.
Available from 1m to 4m high.
Fittings: Products
HANDRAILING
Handrail supplied by Brimar is constructed from galvanised cast iron. It has high corrosion resistance, is highly flexible, and allows quick and easy installation.
Fittings: Products
FLOAT VALVES
Equilibrium with Copper Floats
½" Equilibrium Valve complete with Copper Float
¾" Equilibrium Valve complete with Copper Float
1" Equilibrium Valve complete with Copper Float
1¼" Equilibrium Valve complete with Copper Float
1½" Equilibrium Valve complete with Copper Float
2"Â Equilibrium Valve complete with Copper Float
Fittings: Products
FLOAT VALVES
Equilibrium Valve with Drop Arm Assembly and Copper Float
½" Equilibrium Valve complete with Drop Arm Assembly and Copper Float
¾" Equilibrium Valve complete with Drop Arm Assembly and Copper Float
1"Â Equilibrium Valve complete with Drop Arm Assembly and Copper Float
1¼" Equilibrium Valve complete with Drop Arm Assembly and Copper Float
1½" Equilibrium Valve complete with Drop Arm Assembly and Copper Float
2"Â Equilibrium Valve complete with Drop Arm Assembly and Copper Float
Fittings: Products
KERAFLO K VALVES
Aylesbury K type mechanical float valves are specified for commercial water systems and provide an accurate and efficient method of controlling the level of stored cold water in tanks without raised float valve chambers.
Available from ¾" to 2"
Fittings: Products
KERAFLO KAX VALVES
Aylesbury KAX type mechanical float valves are specified for commercial water systems and provide an accurate and efficient method of controlling the level of stored cold water in tanks with raised float valve chambers.
Available from ¾" to 3"
Fittings: Products
KERAFLO KB VALVES
Aylesbury KB type fully variable float valves are specified for commercial water systems and are designed to provide an accurate and efficient method for controlling the level of stored cold water in tanks with or without raised float valve chambers.
​
Available from ¾" to 3"
Fittings: Products
KERAFLO KP VALVES
The KP type float valve kit is suitable for cold water storage tanks with or without raised float valve chambers and is comprised of an inline control valve together with an Aylesbury KB type valve sized ¾" (20mm) acting as a pilot. The pilot valve offers fully variable delayed action opening and closing water level settings making this ideal for mains or pumped systems and fire sprinkler systems.
Available from 1½" to 6"
Fittings: Products
KERAFLO TANKTRONIC CONTROL SYSTEM
Tanktronic is an advanced tank management system that monitors water levels and temperature. It can also manage and control tank filing. This user friendly system, which is quick to install, offers a complete cost effective solution to water monitoring.
Fittings: Products
LEVEL SWITCHES
RSF44 FLOAT SWITCH
Horizontal float switch consisting of a reed switch and a pivoted actuator magnet. Suitable for high or low level switches.
Fittings: Products
TEMPERATURE DIAL GAUGES
These bimetal thermometers are specifically designed for the H & V market.
​
-30°C/+60°C temperature range
Fittings: Products
LEVEL GAUGES
Universal pneumatic tank contents gauge with a capsule type movement for remote contents indication fully adjustable for tanks up to 3m depth.
Fittings: Products
TEMPERATURE SENSOR
HEAVY DUTY PT100 PROBE WITH TERMINAL HEAD
​
Class B, 4 wire connection.Â
6mm diameter in 316 stainless steel. IP67 aluminium alloy weatherproof connection head.
Sensor temperature rating -100°C to +450°C.
Conforms to IEC751.
Fittings: Products
bottom of page